Network Devices; Call Points; Monitoring Points - C-TEC QT606A Manual

NETWORK DEVICES

Quantec's network devices are small, discreet and designed to blend into any sort of decor.
Up to 256 network devices can be used per system, each containing a non-volatile memory to
store its unique address identification number. Network devices consist of Call Points, Displays,
Monitoring Points, Infrared Ceiling Receivers, Radio Receivers and Addressable Overdoor
Lights. They do not include ancillary devices such as Slave Overdoor Lights or Ceiling Pulls.

CALL POINTS

Quantec's call points have two buttons, a red/green confidence light and
(depending on the version purchased) a remote socket for connecting
ancillary devices such as tail call leads and pressure pads. The type of call
point used will depend on the type of operation (button or magnetic
reset) and the system features you wish to take advantage of. For example,
if you wish to utilise Quantec's Call Follower Sounder option, call points
with sounders should be used. Likewise, if you want to make calls with
infrared transmitters, call points with infrared receivers should be used.
Note: infrared coverage may not be required in all rooms and infrared ceiling receivers are
also available.
QT602 Range Call Points (include remote sockets)
QT602 .................. Quantec call point, button reset
QT602S ................. Quantec call point, button reset with sounder
QT602R ................ Quantec call point, button reset with I/R receiver
QT602RS .............. Quantec call point, button reset with sounder & I/R receiver
QT602M ............... Quantec call point, magnetic reset
QT602SM ............. Quantec call point, magnetic reset with sounder
QT602RM ............. Quantec call point, magnetic reset with I/R receiver
QT602RSM ........... Quantec call point, magnetic reset with sounder & I/R receiver
QT609 Range Call Points (do not include remote sockets)
QT609 .................. Quantec call point, button reset
QT609S ................. Quantec call point, button reset with sounder
QT609R ................ Quantec call point, button reset with I/R receiver
QT609RS .............. Quantec call point, button reset with sounder & I/R receiver
QT609M ............... Quantec call point, magnetic reset
QT609SM ............. Quantec call point, magnetic reset with sounder
QT609RM ............. Quantec call point, magnetic reset with I/R receiver
QT609RSM ........... Quantec call point, magnetic reset with sounder & I/R receiver
Magnetic Reset Keys
NC803M/10 .......... Pack of 10 magnetic reset keys
NC803M/50 .......... Pack of 50 magnetic reset keys

MONITORING POINTS

Monitoring points have one button, a red/green confidence
light and an isolation keyswitch to prevent operation when a door
is to be left open. If required, fire exits, doorbells, telephones, drug
cupboards, etc, can be connected so that operating them makes a
standard or emergency call. Door contacts are not supplied.
QT604 .................. Quantec Monitoring Point, button reset
QT604M ............... Quantec Monitoring Point, magnetic reset
Approved Document No: DNSQ100101 Rev 6 • Page 6 of 16
CALL RESET
Q
RESET
ON
ISOLATED
Q