Device Dimensions - C-TEC QT606A Manual

DEVICE DIMENSIONS

Call points/monitoring points
Infrared ceiling receivers
Overdoor lights (addressable and slave)
RF integrity transmitter plate
Displays/network splitters
Ceiling pulls
Infrared transmitters (main body)
Portable movement detectors
Pressure pads
Quantec controller (back box)
Quantec controller (lid)
Radio receivers
All single gang devices (87mm x 87mm) mount on 25mm single gang UK back boxes.
All double gang devices (146mm x 87mm) mount on 35mm double gang UK back boxes.
Quantec Controllers are designed to be surface mounted or, alternatively, semi-flush
mounted using the AFP385 bezel.
Radio receivers are designed to be surface mounted.
Ceiling pulls have four knockouts for 16mm square mini trunking and their backplate fits
BESA centres.
All quoted dimensions are approximate.
Approved Document No: DNSQ100101 Rev 6 • Page 14 of 16
Width Height
87mm 87mm
87mm 87mm
87mm 87mm
87mm 87mm
146mm 87mm
93 mm -
Ø
45mm 115mm
100mm 48mm
93 mm -
Ø
410mm 250mm
439mm 274mm
271mm 155mm
Depth
35mm
35mm
60mm
25mm
35mm
27mm
25mm
187mm
22mm
80mm
7mm
170mm