General Information; Safety Notices - dB Mozart 30 User Manual

1 GENERAL INFORMATION

1.1 SAFETY NOTICES

To avoid risks of electrical shocks or fire, only qualified personnel should execute the procedures
specified in this manual.
When the protective covers of any device or component connected to a 110 / 240 VAC source by a
power cord are removed, voltages and currents dangerous to life may be exposed.
Contact with 110 / 240 Volts of alternating current and associated direct current and voltages can be
fatal.
CAUTION
To reduce the risks of electrical shock, do not remove the cover (or the back). Refer, for servicing,
to qualified service personnel. This installation should be done by a qualified person and should
comply with to all local applicable laws.
Beryllium Oxide
It is dangerous component if inhaled, eaten or put into direct contact with skin, especially if the skin
is cut or wounded.
Special care is required in handling beryllium material in order to NOT produce any dust, particles,
fumes etc. etc. Whenever beryllium material is broken it is extremely important to collect all parts
in a carefully sealed and marked container for discharging in a specific way through controlled
channels. All above operations have to be affected using gloves and tongs, with special care taken
not to produce dust.
After handling beryllium components it is essential to wash hands carefully.
Beryllium compounds are used in RF Connectors.
MOZART SERIES –FM Exciters/Transmitters - U ' M 8 /87
SER S ANUAL