Upgrading Procedures - dB Mozart 30 User Manual

8.2 UPGRADING PROCEDURES

8.2.1 UPGRADING THE MODULATOR FIRMWARE
The modulator firmware upgrade is available only with the webserver board installed.
The copies of modulator firmwares are always stored in the webserver board so it is possible the
downgrade in case of failed upgrading attempts.
To start the procedure please follow these points:
1. Power on the unit maintaining pressed the OK key to start the unit in bootloader mode.
2. Connect a PC to the unit using a crossover LAN cable. Open a browser and type the IP
address of the unit. Usually the boot time of webserver loading is 1 minute, after that the
webpage will be active.
3. Login as administrator.
4. Go to the "Modulator Upgrade" menu and press the "Sfoglia" button to select the new
firmware.
Fig. 8.9 – Start in bootloader mode
Fig. 8.10 – Modulator Upgrade page
76 /87