Table of Contents
Advertisement
5. The appliance should be located on
a smooth surface. The two front feet
can be adjusted as required. To ensure
that, your appliance is standing upright
adjust the two front feet by turning
clockwise or anti-clockwise, until the
product is in firm contact with the
floor. Correct adjustment of feet avoids
excessive vibration and noise.
6. Refer to "Cleaning and Care"
section to prepare your appliance for
use.
7. Temperature is controlled by the
thermostat knob located on the
indicatör light set (See above diagram)
and controlled by the thermostat knob
located on the indicator light set. (See
diagram on page 3)
8. A special receptacle is supplied to
store the mains plug during transit.
The receptacle is fixed at the back of
the cabinet, on the right hand side of
the compressor. (See diagram) Gently
remove the plug from the receptacle.
Never pull the mains cord, you may
damage the appliance. In the case
of transportation, ensure you locate
the plug in the receptacle provided to
avoid transit damage.
9.Depending on the model of your
product, two plastic wall spacers or
a back air grille is supplied with your
appliance.
If your appliance is equipped with an air
grille, please refer ) for installation of the
air grille.
3
8
EN
1
2
3
3
1
Advertisement
Table of Contents
