Set Radio Station Memory; Using The Weather Radio; Set Weather Channel Memory - Radio Shack 12-519 User Manual

Set Radio Station Memory

1. Press AM or FM to toggle between AM1, AM2,
FM1 or FM2. The selected band indicator
appears on the left side of the display.
2. Press  or  to find a station.
. Briefly hold a memory button (M1–M5) until the selected memory indicator
– ) appears on the right side of the display.
(M1 M5
You can store up to five channels each for AM1, AM2, FM1, and FM2.
. To listen to a preset station, press AM or FM to toggle between AM1,
AM2, FM1 or FM2, then press one of memory buttons M1–M5.

Using the Weather Radio

Press WX to listen to the weather radio. The radio will select the last channel
used.
Manual Scan – Press WX, then press  or .
Auto Scan – Press WX and then briefly hold
 or  until the channels start to change. The
radio stops when it finds the channel with strongest
signal strength.
n
Notes:
• All seven NOAA weather channels are preprogrammed on your radio. If the
radio cannot find a signal, it will keep scanning.
• If the weather signal is lost, WARNING and ADVISORY alert indicators
flash alternately, and WATCH indicator lights.
• If you are having trouble finding a weather signal, try adjusting the antenna
or moving the radio to a different location. You may need to install an
external antenna. See "External Antenna" on page 7.
• If the radio has not received a SAME alert signal (including test or demo
signals) for 10 days or longer, a warning message will scroll on the display:
"
10 days have lapsed since last message received. Check
" See "How do I test my radio?" on page 20.
reception.
9