Command Reference List - LG M2262D Owner's Manual

APPENDIX

Command Reference List

COMMAND1 COMMAND2
01. Power k
02. Input Select x
03. Aspect Ratio k
04. Screen Mute k
05. Volume Mute k
06. Volume Control k
07 . Contrast k
08. Brightness k
09. Color k
10. Tint k
1 1. Sharpness k
12. OSD Select k
13. Remote Control
k
Lock Mode
COMMAND1 COMMAND2
19. Channel Tuning
m
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the set.
[Command 2] : Second command to control the set.
[Set ID] : You can adjust the set ID to choose desired set ID
number in Option menu. Adjustment range is 1
When selecting Set ID '0' , every connected the set is
controlled. Set ID is indicated as decimal ( 1
menu and as Hexa decimal ( 0x0
/receiving protocol.
[DATA] : To transmit the command data.
Transmit the 'FF' data to read status of command.
[Cr] : Carriage Return
ASCII code '0x0D'
[ ] : ASCII code 'space (0x20)'
* In this model, set will not send the status during the standby mode.
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
The set transmits ACK (acknowledgement) based on this for-
mat when receiving normal data. At this time, if the data is
data read mode, it indicates present status data. If the data is
data write mode, it returns the data of the PC computer.
DATA
(Hexadecimal)
a 00 ~ 01 14. Treble
b ( p.92) 15. Bass
G
c ( p.92) 16. Balance
G
d 00 ~ 01 17 . Color Temperature
e 00 ~ 01 18. Auto Configuration
f 00 ~ 64 20. Channel Add/Del
g 00 ~ 64 21. Key
h 00 ~ 64 22. Backlight
i 00 ~ 64
j 00 ~ 64
k 00 ~ 64
l 00 ~ 01
00 ~ 01
m
DATA00 DATA01
(Hexadecimal) (Hexadecimal)
physical major
a
program high program low
* In this model, set will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
(j, k, m or x)
[Set ID] : Use the small character, if set ID is 10, it will send the '0' , 'a' .
[DATA] : Use the small character, if data is 0 x ab, it will send the 'a' , 'b' .
[OK] : Use the large character.
~
99.
~ 99 ) on
Error Acknowledgement
~ 0x63 ) on transmission
[Command2][ ][Set ID][ ][NG][Data][x]
The set transmits ACK (acknowledgement) based on this for-
mat when receiving abnormal data from non-viable functions
or communication errors.
* In this model, set will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the '0' , 'a' .
[DATA] : Use the small character, if data is 0 x ab, it will send the 'a' , 'b' .
[NG] : Use the large character
COMMAND1 COMMAND2
k
k
k
k
j
m
m
m
DATA02 DATA03
(Hexadecimal) (Hexadecimal)
major low minor high
Data1: Illegal Code
Data2: Not supported function
Data3: Wait more time
DATA
(Hexadecimal)
r 00 ~ 64
s 00 ~ 64
t 00 ~ 64
u 00 ~ 02
u ( p.93)
G
b 00 ~ 01
c ( p.94)
G
g 00 ~ 64
DATA04 DATA05
(Hexadecimal) (Hexadecimal)
minor low attribute
91