Programming A Code Into A Remote Mode; Programming Code; Programming The Remote Control - LG M2262D Owner's Manual

APPENDIX

PROGRAMMING THE REMOTE CONTROL

The remote is a multi-brand or universal remote. It can be programmed to operate most remote-con-
trollable devices of other manufacturers.
Note that the remote may not control all models of other brands.

Programming a code into a remote mode

1 To find out whether your remote control can operate the component without programming, turn on the
component such as a VCR and press the corresponding mode button (such as a D V D or V C R) on the
remote control. While pointing at the component, test the POWER and PR + / - buttons to see if the
component responds properly. If not, the remote requires programming to operate the device.
Turn on the component to be programmed, then press the corresponding mode button (such as a D V D or
2
V C R) on the remote control. The remote control button of desired device is lighted.
3 Press the MENU and MUTE buttons simultaneously. Now the remote control is ready to be programmed
with the new code.
Enter a code number using the number buttons on the remote control. Programming code numbers for the
4
corresponding component can be found on the following pages. If the code is correct, the device will turn
off.
5
Press the MENU button to store the code.
6
Test the remote control functions to see if the component responds properly. If not, repeat from step 2.

PROGRAMMING CODE

DVD
Brand Codes
APEX DIGITAL 022
DENON 020 014
GE 005 006
HARMAN KARDON
JVC 012
LG 001 010 016 025
MAGNAVOX 013
MARANTZ 024
86
Brand
MITSUBISHI
NAD
ONKYO
027 PANASONIC
PHILIPS
PIONEER
PROCEED
PROSCAN
Codes Brand
002 RCA
023 SAMSUNG
008 017 SONY
003 009 THOMPSON
013 TOSHIBA
004 026 YAMAHA
021 ZENITH
005 006
Codes
005 006
01 1 015
007
005 006
019 008
009 018
010 016 025