Wireless Network Connecting- Transfer To Wireless Network Mode - Sapido DDLA0z User Manual

Sapido Technology Inc. www.sapido.com.tw

10.2 Wireless network connecting- Transfer to Wireless network mode

Step 1. Switch to the W mode (Wi-Fi mode) and plug in. WAN/LAN light will turn red to green
while starting up. After 30 seconds, both ZigBee lights and Wireless lights will turn on.
Step 2. Then press the ZigBee button on both Motion Sensor(MDKA0z) and Door & Window
Sensor(DDLA0z) separately once(about 1 sec) to make them connect to the Sensor Alarm
Router(WDG71n).
84