How To Auto Update The Firmware Version - Sapido DDLA0z User Manual

Sapido Technology Inc.

8.3.1 How to auto update the firmware version

Step 1. When the update
symbol
next to one of the sensors,
click it and complete the
updating.
Step 4. You will see Sensor
Alarm Router (WDG71n) lights
on green after updating
Step 2. Click <Sure> before
appear on the right double check
Step 5. Then press the ZigBee button on both Motion
Sensor(MDKA0z) and Door & Window Sensor(DDLA0z)
separately once(about 1 sec) to make them connect to the
Sensor Alarm Router(WDG71n).
www.sapido.com.tw
69
Step 3. Under connecting... Do
not turn off or log out.