Dimmer Control - Jensen JCR-231 User Manual

Wave your hand over the IR SENSOR (#11)
again within 1 second to show the ALARM1
time
4. In radio off mode, and with the Display Dimmer Switch set to "AUTO OFF", the time display will
automatically turn off in 15 seconds. Use the IR Sensor to turn it on again:
Tap the DIMMER BUTTON (#8) repeatedly to select the high/low brightness of the LED DISPLAY (#10).
Notes:
• Every time you power up the unit, the LED brightness will revert back to the high setting (brightest
setting).
• After adjusting the LED brightness in standby mode, the intensity level will be stored and there is no
need to adjust it again unless you disconnect the unit without a battery installed.
AUTO DIM
1. Press and hold the DIMMER/SET BUTTON (#8).
2. The AUTO DIM LED indicator will flash.
Wave your hand over the IR SENSOR (#11)
again within 1 second to show the ALARM 2
time

DIMMER CONTROL

E-11