Related Manuals for Jensen JCR-238
Summary of Contents for Jensen JCR-238
-
Page 1: User Manual
Digital Dual Alarm Projection Clock Radio MODEL : JCR-238 USER MANUAL PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE... -
Page 2: Important Safety Instructions
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. - Page 3 9. AC adaptor is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the AC adaptor should be disconnected form the mains socket outlet completely. 10. Only use attachments/accessories specified by the manufacturer.
- Page 4 b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance - this indicates a need for service.
-
Page 5: Compliance With Fcc Regulations
COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. -
Page 6: Protect Your Furniture
PROTECT YOUR FURNITURE!! This system is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber ‘feet’... -
Page 7: Dear Jensen Customer
Customer’s Record: The serial number of this product is found on its bottom. You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss. Model Number: JCR-238 Serial Number :... -
Page 8: Location Of Controls
ACCESSORIES 1. Clock radio 2. Power adaptor 3. User manual LOCATION OF CONTROLS... - Page 9 18. DC IN JACK 19. BATTERY COMPARTMENT 20. ANTENNA 21. SPEAKER POWER SOURCE (AC ADAPTOR ONLY) The JCR-238 operates with an external AC-DC adaptor with output DC 5V 1500mA The unit is also equipped with a battery back-up system for the clock that is powered by 1 x CR2032 lithium battery (Not included).
- Page 10 1. Connect the cord of the power adaptor to the DC IN JACK (#18) of the JCR-238. 2. Connect the plug of the power adaptor to a wall socket. The radio is powered and in standby mode when you see the display is switched on. Battery Back-up system • The radio is equipped with a battery back-up system. It requires a 3V lithium battery CR2032 (not included). Insert the battery into the battery compartment (#19) and make sure the positive...
-
Page 11: Time And Calendar Setting
• Setting the time: Press the BACKWARD BUTTON (#3) to set the hour and the FORWARD BUTTON (#4) to set the minute. • Press the CLOCK BUTTON (#5) to confirm. ALARM OPERATION The JCR-238 features a dual alarm clock. To set the alarms: 1. In standby mode, press and hold the ALARM 1/ALARM 2 BUTTONS (#6/#7) to enter the alarm time setting mode. 2. In the alarm time setting mode, press the ALARM 1/ALARM 2... -
Page 12: Snooze Function
Once the alarm setting is done, the alarm will be automatically activated with the corresponding alarm indicator (alarm or radio) light. Turning the alarms on or off When the clock time is displayed, tap the ALARM 1/ALARM 2 BUTTONS (#6/#7) to enable or disable the respective alarm. The corresponding Alarm 1/Alarm 2 indicators (#12/#13/#14/#15) will light when the alarm is enabled. Deactivating a sounding alarm • Press any ALARM OFF BUTTONS (#6/#7/#8) to switch off the alarm sound. -
Page 13: Radio Operation
RADIO OPERATION Listening to the radio 1. Press the POWER button (#8) to turn on the JCR-238. 2. Tap the BACKWARD BUTTON (#3) or the FORWARD BUTTON (#4) to adjust frequency. 3. Press and hold the BACKWARD button (#3) or the FORWARD button (#4) to automatically tune to the next available FM station. 4. Tap the VOL UP button (#7) or the VOL DOWN button (#6) to obtain the desired volume level. 5. Press the POWER button to switch the radio off. Notes: • Use manual tuning to select weaker stations that might be skipped during automatic tuning. • If the automatic tuning does not stop on the exact frequency of the station, for example, it stops on 88.9MHz instead of 88.8... -
Page 14: Sleep Operation
SLEEP OPERATION The sleep timer allows the unit turn off automatically after a designated time has elapsed. 1. Press the POWER BUTTON (#8) to turn on the JCR-238. 2. Press the BACKWARD/FORWARD BUTTONS (#3/#4) to select the desired radio station. 3. Press the SLEEP BUTTON (#2) to enter sleep mode. 4. Repeatedly tap the SLEEP BUTTON (#2) to select the sleep timer 10 – 20 – 30 - 40 – 50 – 60 - 70 – 80 – 90 - 00 (in minutes). The unit will play for the selected length of time then... - Page 15 TIME PROJECTION 1. Press the PROJECTOR ON/OFF BUTTON (#1) to turn “On” or “Off” the projector. 2. Project the time onto a light/flat surface such as the ceiling or wall behind the JCR-238. 3. The projector portion of the JCR-238 can be repositioned (up to 180° forward to back) to adjust the projection angle. 4. If necessary, you can tap the 180° FLIP BUTTON (#1) to invert the projected time 180º. Notes : The optimal projection distance is 3-9 feet.
-
Page 16: Care And Maintenance
CARE AND MAINTENANCE • Clean the radio with a soft damp cloth and let all parts dry completely after cleaning. • Do not use any aggressive cleaners, brushes with nylon bristles, sharp or metallic cleaning utensils, knives, hard scrapers and the like. They could damage the surfaces of the radio. • Do not immerse the radio in water and do not let water getting into the housing of the radio. • Unplug the power adaptor and clean the radio before storage. • Always store the radio in a dry and clean place. SPECIFICATIONS Power : AC Adaptor:... - Page 17 At Spectra, environmental and social responsibility is a core value of our business. We are dedicated to continuous implementation of responsible initiatives with an aim to conserve and maintain the environment through responsible recycling. Please visit us at http://www.spectraintl.com/green.htm for more information on Spectra’s green initiatives or to find a recycler in your area.
- Page 18 2. This warranty does not cover damage or equipment failure caused by electrical wiring not in compliance with electrical codes or SPECTRA user manual specifications, or failure to provide reasonable care and necessary maintenance as outlined in the user manual. 3. Warranty of all SPECTRA products applies to residential use only and is void when products are used in a nonresidential environment or installed outside the United States.
Need help?
Do you have a question about the JCR-238 and is the answer not in the manual?
Questions and answers