Using Track Search; Using Track Skip; Selecting A Cd - Radio Shack 10 Disc CD Changer Owner's Manual

12-2182.fm Page 18 Friday, September 3, 1999 7:31 AM
To turn on the CD changer and play a
CD, press (Play/Pause) on either
the infrared remote control or the CD
changer controller. The CD starts to play
from Track 1 of the CD in the lowest-
numbered slot. The display shows
and the track number.
DISC
RadioShack
d
ISC
OFF
CD CHANGER CONTROLLER
Note: The CD changer controller has
only and buttons. To control
OFF
other functions, use the infrared remote
control.
After the CD changer plays each track
on the CD, it automatically selects the
next loaded CD (from lowest to highest)
and plays all tracks on that CD, starting
with Track 1.
When the CD changer has played all
tracks on all loaded CDs, it automatically
plays the lowest loaded CD, starting with
Track 1. Play continues until you stop
the CD changer.
Press while a CD is playing to tem-
porarily stop play. appears on the dis-
play. Press again to resume play.
Note: When play is paused for 5 min-
utes, the CD changer automatically
turns off.
To stop play and turn off the CD chang-
er, press When you press
OFF.
18
CD changer resumes playing the last
song played.
RadioShack
d
ISC
CD CHANGER CONTROLLER

Using Track Search

To move to the beginning of the next or
previous track on the CD, press
. Repeatedly press
move to another track. The display
shows the current track number.

Using Track Skip

To search for a particular section of a
track on the current CD, hold down
or during play. The CD changer
rapidly plays the CD backward or for-
ward. Release
normal play.
The display shows the rotating disk
moving faster and

Selecting a CD

To select a particular CD loaded in the
CD magazine, repeatedly press
or until the display shows the CD
– DISC
number under
, the
OFF
OFF
or
or to resume
or flashes.
+ DISC
DISC .
or
to