Table of Contents
Advertisement
12-2182.fm Page 14 Friday, September 3, 1999 7:31 AM
If you are mounting the CD changer
vertically, use a screwdriver to
remove the screws on both sides of
the CD changer from
SPRING ATTACHMENT H/V
both sides, then replace the screws
into
.
V
Caution: If you do not set
ATTACHMENT H/V
the CD changer to the correct
mounting axis, the CD changer
might skip during play.
2. Use a medium-sized screwdriver to
attach the supplied mounting brack-
ets to the sides of the CD changer.
Mounting
Stud
14
and turn
H
to
on
V
SPRING
on both sides of
Mounting
Bracket
Mounting the Audio Adapter
Use the supplied screws to attach the
Audio Adapter under the vehicle's dash-
board.
Use cable ties (not supplied) to secure
the Audio Adapter's wires under the ve-
hicle's dashboard.
3. Using the supplied mounting studs
as templates and the width between
the mounting brackets as a guide,
mark the positions for the mounting
holes.
4. Attach the mount-
ing studs to the
mounting
surface
using the supplied
screws.
5. Attach the CD changer to the
mounting studs using the supplied
nuts.
Advertisement
Table of Contents
