Table of Contents
Advertisement
Do these steps to move the upper basket to the lower po-
sition:
1.
Pull the basket out until it stops.
2.
Carefully lift up the two sides.
3.
Hold the mechanism and let it fall back down slowly.
Setting and starting a washing programme
Select and start a washing programme without delay
start
1.
Switch on the appliance.
2.
Make sure that the appliance is in setting mode.
3.
Select a washing programme. Refer to 'Washing pro-
grammes'.
– The related programme indicator light comes on.
– All other programme indicator lights go off.
– The programme duration flashes in the display.
– The programme-in-progress indicator light
comes on.
4.
Close the appliance door. The washing programme
starts automatically.
– The programme-in-progress indicator light re-
mains on.
You can select the washing programme also with
the door closed. When you press a programme but-
ton, you have only 3 seconds to select a different washing
programme. After these 3 seconds, the washing pro-
gramme start automatically.
Select and start a washing programme with delay
start
1.
Switch on the appliance and select a washing pro-
gramme.
2.
Press the delay start button again and again until the
display shows the necessary number of hours for the
delay start.
3.
Close the appliance door.
– The countdown starts automatically.
– The programme-in-progress indicator light
goes off.
– When the countdown is completed, the washing
programme starts automatically.
– The programme-in-progress indicator light
comes on.
Caution!
• Do not lift or lower the basket on one side only.
• If the basket is in the upper position, do not put
cups on the cup racks.
The opening of the appliance door interrupts the
countdown. When you close the door, the count-
down continues from the point of interruption.
You can select the delay start also with the door
closed. When you select a washing programme, you
have only 3 seconds to select the delay start. After these 3
seconds, the washing programme starts automatically.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues from the point
of interruption.
How to cancel a washing programme or a delay start
If a washing programme or a delay start has not
started, you can change the selection.
When a washing programme or a delay start are in pro-
gress, it is not possible to change the selection. It is nec-
essary to cancel the washing programme or the delay start
to make a new selection.
When you cancel the delay start, this automatically
cancels the selected washing programme. You have
to select the washing programme again.
1.
Press and hold the function buttons B and C until all
the programme lights come on
2.
Make sure that there is detergent in the detergent
dispenser before you start a new washing pro-
gramme.
End of the washing programme
When the washing programme is completed, the display
shows a zero.
• The programme-progress indicator is off.
• The end indicator is on.
1. Deactivate the appliance.
2. Open the appliance door.
11
Advertisement
Table of Contents
