Mustang-200 Computing Accelerator
5.4.3.1 Port Settings
This is a sub page from the card page. After clicking the Port Settings button, the Port
Settings page will appear with the network information regarding how this card is
connected to host system. The Port Settings page contains the following information:
Card ID and CPU ID
QTS name
IP addresses
Port information for QTS and protocols (Icecast, RTMP, HTTP)
NOTE:
The Icecast, RTMP, HTTP and QTS ports can be changed by rolling
over the blued port numbers on the page and clicking
be noted that setup a unique port for each service of the card. To check
the ports that are assigned to other cards, see the Port Information
table.
icon. Please
Page 27