Table of Contents
Advertisement
Installation
This section will guide you to install the AP through hardware connection and
configure the settings through web browser.
Before starting to configure the router, you have to connect your devices correctly.
1. Connect the DSL interface to the MODEM port of external ADSL splitter
with an ADSL line cable.
2. Connect the LAN port to your computer with a RJ-45 cable.
3. Connect one end of the power adapter to the Power port of this device.
Connect the other end to the wall outlet of electricity.
4. Power on the modem.
5. Check the ACT, LAN, and DSL LEDs to assure network connections.
Advertisement
Table of Contents
Need help?
Do you have a question about the Vigor122 and is the answer not in the manual?
Questions and answers