Advertisement
Name:
COMMAND
Description:
Command which should be sent through RS232 port at specified intervals.
Maximum size of command is 20 characters. Empty command means:
don't send anything.
Default:
Empty
Example:
COMMAND = SI
Name:
INTERVAL
Description:
Interval at which command should be sent (expressed in seconds). If this
parameter equals zero it means that command won't be sent.
Default:
10
Example:
INTERVAL = 20
Name:
ECHO
Description:
This parameter determines whether command sent to RS232 port should
be logged to file or not. Allowed values: YES or NO.
Default:
YES
Example:
ECHO = NO
Name:
LOG_DATE
Description:
This parameter determines whether date should be used as a timestamp or
not. Allowed values: YES or NO.
Default:
NO
Example:
LOG_DATE = YES
Name:
LOG_TIME
Description:
This parameter determines whether time should be used as a timestamp or
not. Allowed values: YES or NO.
Default:
NO
Example:
LOG_TIME = YES
Name:
TRIG_TOKEN
Description:
This parameter specifies sequence of characters which should make
timestamp to be inserted in a log file. Maximum size of this sequence is 20
characters. Timestamp will be placed in a log file behind recognized
sequence of characters. Empty "TRIG_TOKEN" means: There is no
sequence of characters which should make timestamp to be inserted in a
log file.
Default:
\r\n
Example:
TRIG_TOKEN = "" (empty)
(\r – code 13; \n – code 10) (ENTER)
Advertisement
