Advertisement
Parameters that can be modified:
Name:
PATH
Description:
Path to file plus file name (8.3 format) where transmission is saved. If the
file doesn't exist, it will be created. If it exists transmission will be added at
the end of file.
Default:
/LOG.TXT
Example:
PATH = /FOLDER1/ RESULTS.TXT
Name:
AUTO_NAME
Description:
Parameter can have „YES" or „NO" value. If „NO" is set, it means that after
taking out the pendrive and connecting it once again, RS232 transmission
will be saved to the same file defined by PATH parameter. If „YES" is set
each taking out and in will create new file where the transmission will be
saved. New files names will be created using file name (PATH parameter)
and successive numbers for example: LOG00001.TXT, LOG00002.TXT,
LOG00003.TXT etc. If the numbers run out, instead of next number, 'X'
sign will show up.
Default:
NO
Example:
AUTO_NAME = YES
Name:
BAUD
Description:
Setting RS232 transmission speed. (Available: 2400; 4800; 9600; 14400;
19200; 38400; 56000; 57600; 115200)
Default:
4800
Example:
BAUD = 9600
Name:
DATE
Description:
If this parameter is present in configuration file, date will be set and this
parameter will be preceded with „//" signs to avoid changing data during
next pendrive inserting.
Format: YYYY-MM-DD
Default:
Data doesn't change
Example:
DATE = 2010-04-11
Name:
TIME
Description:
If this parameter is present in configuration file, time will be set and this
parameter will be preceded with „//" signs to avoid changing data during
next pendrive inserting.
Format: GG:MM:SS.
Default:
Time doesn't change
Example:
TIME = 08:12:45
Advertisement
