Advertisement
4
Using your CCTV system
In this section you will find guidance on some of the more
important functions of your CCTV system.
For more detail visit www.philex.com/support where find
a full User Guide for your CCTV system.
Recording Settings -
The default recording mode is continuous mode for each
camera, which means that the cameras will record
continuously to the built-in hard drive. The capacity of the
hard drive is about thirty days and when the disk is full it
will overwrite the previous video starting from the
earliest recording.
General Settings - Date and Time:
Right click on the mouse to open "Quick Menu", select
"Main Menu" then "General" set the System Time - date
and time and formats then press OK.
Alarm Set:
Allows you to enable the motion detect alarm which can
help you find when there is any change in image content
in your recordings caused by movement.
You can select motion detect on a single channel or all.
To set the alarm right click on the mouse to open "Quick
Menu", select "Main Menu" then "Alarm" and then
"Alarm Set".
To Setup Another Smartphone:
First install NPview app as described in Step 2 on page 4.
Right click on the mouse to open the "Quick Menu" on
the DVR, select "Guide" (to open Screen 1 as shown on
page 4 then click "Next Page" (to open Screen 2) and
follow Step 3 on page 4.
To Rename Channels:
In the "System Menu" open "GUI display" click on
"Channel Title Set" and rename your channels
e.g. Garage, Front Door etc.
Live View on Your TV:
The default screen shows a tiled view of all 4 channels live,
double click on a channel to view it full screen, double click
again to return to the default view.
5
AFTER SALES SUPPORT
www.philex.com/support
MODEL: 4AHD/C720
0845 366 4685
1890 812 721
GB
IRE
Advertisement
