Advertisement
Connections
Camera connections:
1. Connect one of the PSUs (D) to the power splitter cable (E) connect this to the camera extension cables
(C), connect the BNC plugs on each extension cable [C] to one of the yellow Video In (BNC) ports
[1 on Fig. 1] on the rear of the DVR. 1.
2. Connect each of the extension cables [C] to the power socket and BNC plugs connected to a camera
of the power adaptor [D].
Peripheral connections:
3. For HD connections connect the HDMI cable (G) to the DVR and an HD TV/monitor alternatively you
can connect a display using a VGA cable (not supplied) to the VGA socket (3 on Fig. 1).
4. Connect the mouse to the USB port on the bottom right of the front panel [4 on Fig. 1] or alternatively, if
it is more convenient, connect to the upper USB 2.0 port of the two available marked USB 1 [5 on Fig. 1].
Connecting an optional USB backup storage device:
5. The DVR has a 1TB hard drive installed but you can connect an additional USB storage device for
additional backup or for transferring a recording. Connect the additional USB storage device to the
lower USB 2.0 port of the two marked USB 2 [6 on Fig. 1].
Connecting to your home network:
6. Plug the RJ45 Ethernet cable supplied [H] into the LAN port [7 on Fig. 1] on the DVR and the other end
into a spare port on your router or wireless access point.
Power connections:
7. When all other connections have been made plug the jack from the remaining PSU (D) in to the DC In
socket [8 on Fig. 1] on the back of the DVR. Plug the two PSUs into a convenient 13A mains socket and
switch on the sockets.
Fig. 2 DVR and Camera Connections
Kit Contents:
A. 1x DVR
B. 1x Video cameras and connection cables x 4
C. 4x 18m Camera video/power extension cables
D. 2x 12V��2A Plug-in power supply units (PSU)
AFTER SALES SUPPORT
C
F
0845 366 4685
GB
B
A
G
E
E. 1x Power splitter cable
F. 1x Mouse
G. 1x HDMI cable
H. 1x RJ45 Ethernet network cable
3
www.philex.com/support
1890 812 721
IRE
H
D
D
2
MODEL: 4AHD/C720
Advertisement
