Advertisement
DVR Setup
Once you've connected all the leads, turn on your DVR and you are ready to go, so just follow these simple
instructions to get your home security system up and running;
1. Connecting your DVR to your broadband router
Make sure the DVR is turned off, and if you haven't
already done so, using the Ethernet cable provided, plug
one end into the LAN Port (7) on your DVR and connect
the other end into an available port on your broadband
router. Turn on your DVR and display and the SCREEN 1
opposite will appear. Press "Next Page" using the mouse
and SCREEN 2 will appear.
2. Downloading the NPview App to your iOS or
Android phone
You can either scan the appropriate QR code from
below, using your phone, to take you straight to the
App or alternatively visit App Store or Google Play and
search for the NPview App.
iOS
• Open the App on your iOS or Android phone.
(if you have not already created your username, select
"Register" to create your unique login).
• Login using your username and password.
3. Scanning the S/N QR code from your DVR.
• On your phone select Device Manage (
• Click "Add device"
• Next to UMID: or Device ID: tap on
your phone scan the SN QR Code on display
SCREEN 2 see opposite.
NB: The ID number of your DVR will be displayed next to
UMID or Device ID when you have scanned the
code successfully. Check the settings below and leave
User ID: as admin, leave password blank (don't enter
anything) select Multi ch and "4"
• Click Save and the message "Add Success"will appear.
• The App will return to the Device List and your
DVR ID number will be displayed in the list.
• Click on your DVR number to view your cameras live.
If you are not successful connecting it will probably be
because there is no network connection. Refer to the
troubleshooting section of the full User Guide
which is available at www.philex.com/support.
AFTER SALES SUPPORT
Android
)
then with
4
0845 366 4685
1890 812 721
GB
IRE
SCREEN 1
SCREEN 2
www.philex.com/support
3
MODEL: 4AHD/C720
Advertisement
