Disassembly/Assembly Procedures Of Deck Mechanism - FUNAI 23C-250 Service Manual

DISASSEMBLY/ASSEMBLY PROCEDURES
Before following the procedures described below, be sure to remove the deck assembly from the cabinet. (Refer to
CABINET DISASSEMBLY INSTRUCTIONS on page 1-5-1.)
All the following procedures, including those for adjustment and replacement of parts, should be done in Eject mode;
see the positions of [48] and [49] in Fig. DM1 on page 2-4-3. When reassembling, follow the steps in reverse order.
STEP START-
/LOC. ING
No. No.
[1] [1] Top Plate
[2] [1] Cassette Holder Assembly T
[3] [2] Slider L
[4] [2] Slider R
[5] [4] Lock Lever
[6] [2] Cassette Plate
[7] [7] Cylinder Assembly
[8] [8] Loading Motor Assembly
[9] [1] Tape Guide Assembly
[10] [1] Door Opener B
[11] [10] Pinch Arm (B) Assembly
[12] [11] Pinch Arm (A) Assembly
[13] [13] FE Head
[14] [14] First Post Assembly
[15] [15] Prism
[16] [16] Standard Post
[17] [1] Slider Shaft
[18] [17] C Drive Lever L
[19] [17] C Drive Lever R
[20] [1] Capstan Motor
[21] [21] FF Arm Holder
[22] [22] Clutch Assembly
[23] [22] Center Gear
[24] [24] Cam Holder
[26] [26] Cam Gear (B)
[27] [27] Mode Gear
[28] [27] Mode Lever
[29] [29] Worm Holder
[30] [30] Pully Assembly
[31] [29] Cam Gear (A)
[32] [28] TR Gear C
[33] [32] TR Gear Spring
OF DECK MECHANISM
PART
Fig. No.
T DM3
DM4
T DM5
T DM5
T DM5
T DM5
T DM1, DM6
T DM1, DM7
T DM1, DM8
T DM1, DM8
T DM1, DM8
T DM1, DM8
T DM1, DM9
T DM1, DM9
T DM1, DM9
T DM1, DM9
T DM10
T DM10
T DM10
B DM2, DM11 3(S-14), Cap Belt
B DM2, DM12 (S-15)
B DM2, DM12 (C-1)
B DM12
B DM2, DM13 (C-2)
B DM2, DM13 (C-3), *(P-4)
B DM2, DM14 (C-4)
B DM2, DM14 (C-5)
B DM2, DM14 (S-16)
B DM2, DM14
B DM2, DM14
B DM2, DM14 (C-6)
B DM14
2-4-1
REMOVAL
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
2(S-1), *2(L-1)
(S-19)
(S-2)
(S-3)
(S-4), *(P-1)
3(S-5),
Two Connectors
2(S-6), (S-7), LDG
Belt, ACH Connector
AN(9P) and 9B
*(P-2), (C-8)
(S-8), *(L-2)
*(P-3)
(S-9)
(S-10)
(S-11)
*(L-4)
(S-12), *(L-7)
INSTALLATION
ADJUSTMENT
CONDITION
H8743DA