Accessories Chart - DeWalt DW831 Instruction Manual

English
5" (125 mm) grinding
Wheels (DW831)
Type 27 guard
unthreaded backing flange
Type 27
depressed center wheel
threaded locking flange
Type 27 guard
Type 27 hubbed wheel
sanding Discs (DW831)
rubber backing pad
sanding disc
sanding clamp nut

WARNING: DW840
cannot be used
with conventional
sanding discs and
backing pads due
to mismatched
rated speeds.

CAUTION: Use a Type 27 guard with wire brushes and wheels. Operators and others in the area should wear
appropriate eye, face and body protection. Strands of wire may break and fly off when wire wheels and brushes are
in use.

CAUTION: Type 1 abrasive and diamond cut-off wheels may not be used on this tool. A Type 1 cut-off wheel
guard is not available for these grinders.
View other Power Tools made by DeWalt Tools on our website.

ACCESSORIES CHART

7" (180 mm) grinding
Wheels (DW840)
Type 27 guard
backing flange
Type 27
non-hubbed wheel
clamp nut
Type 27 guard
Type 27 hubbed wheel
Wire Wheels
Type 27 guard
3" (76.2 mm)
wire cup brush
sanding Flap Discs
Type 27 guard
unthreaded backing flange
non-hubbed sanding flap disc
threaded locking flange
Type 27 guard
4" (101.6 mm)
wire wheel
Type 27 guard
hubbed sanding flap disc