Table of Contents
Advertisement
6
Reference Information
Table 10: Reference - RDL-2000 Technical Specifications
System Capability:
RF Band:
Channel Size:
Center Freq. Steps:
Max Tx Power:
Rx Sensitivity:
Data Rate:
PoE Cable:
Network Attributes:
Modulation:
Dynamic Control:
MAC:
System Configuration:
Network Connection:
PoE Cable:
Wireless Encryption:
Operating Temp:
Power Consumption:
Power Supply:
Compliance:
1
Restricted by regional regulatory certification: ETSI 5.4-5.8 GHz, FCC/IC 5.8 GHz, Other 5.4-5.8 GHz
2
Center frequency is dependent on region.
3
Maximum power based on modulation and coding.
4
Actual Ethernet data throughput is dependent on factors including: protocols, packet size (1916 bytes
max.), burst rate, transmission latency, and link distance.
5
Total distance from RDL-2000 port to PoE port.
6
Determined be factory installed hardware.
70-00143-01-01a
RDL-2000
LOS, optical-LOS, and non-LOS (OFDM)
4.940 to 5.850 GHz
TDD, 2x2 MIMO
5, 10, 20, and 40 MHz (software selectable)
1, 2
5 MHz
1, 3
22 dBm
(-22 dBm min.)
-95 dBm (BPSK)
300 Mbps wireless data rate
Up to 91 m (300 ft)
Transparent bridge
DHCP pass-through
BPSK to 64 QAM
Bi directional dynamic adaptive
DFS, ATPC:
PTP, Fast ARQ (Automatic Retransmit)
IIS (Intelligent Interference Sensing)
ACM (Adaptive Coding & Modulation)
FEC (Forward Error Correction)
Fragmentation, Concatenation
Telnet,
Link Manager Application (Windows-based)
2x 10/100 Ethernet (RJ-45)
Up to 91 m (300 ft)
AES-128
-35 C to 60 C
Max 6 W, PoE
110/220/240 VAC 50/60 Hz
Safety:
IEC, and EN 60950
EMC:
EN 301 489-1, EN 301 489-17
RF:
FCC: part 15
Industry Canada: RSS 210
ETSI: EN 302 502, EN 301 893
All specifications are subject to change without notice.
Proprietary Redline Communications © 2010
1
6
,
1
4
5
5
Page 48 of 50 September 20, 2010
User Manual
Chapter
6
Advertisement
Table of Contents
