Table of Contents
Advertisement
43-786.fm Page 8 Monday, August 16, 1999 8:02 AM
wiring for you. The USOC number of the
jack to be installed is RJ11C, or RJ11W
for a wall plate jack.
Caution: The supplied adapter supplies
9 volts AC, delivers at least 400 milli-
amps, and has a plug which properly fits
the TAD's
jack. Using an adapter
DC 9V
that does not meet these specifications
might damage the TAD or the adapter.
On a Desk Top
Follow these steps when you place the
TAD on a desk, shelf, or table.
1. Plug one end of the supplied long
modular cord into the
on the back of the base.
4.epsi
2. Plug the modular cord's other end
into a modular phone line jack.
3. Plug one end of the supplied coiled
cord into the jack on the left side of
the TAD-1026. Plug the other end
8
into the handset's jack and place
the handset on the TAD.
4. Insert the supplied adapter's barrel
plug into the
of the TAD. Then plug the adapter's
other end into a standard AC outlet.
jack
TEL.LINE
When you first connect power, the
TAD beeps once and the message
counter counts up from 0 to 10.
Then the TAD beeps.
CL
cate that no outgoing messages are
recorded, and the day/time stamp is
not set.
jack on the back
DC 9V
DC 9V Jack
illustration
A1
and
alternately appear to indi-
0
,
A2
,
Lo
,
Advertisement
Table of Contents
