Ecom Instruments PTC 400 Instruction Manual page 4

3. Automated Stepping
The PTC 400 can auto-step through some or all of the stored setpoints for a given range.
The procedure is as follows:
a. Press "Shift" followed by "Auto".
b. "Auto SPT ?" will appear. Enter the ending setpoint location. Example: if you have all 9
setpoints stored but only want to step through the first 3 then enter "3" for this question.
c. The next screen prompts you to enter the dwell time from 5 to 500 seconds.
Simply enter a number in that range.
d. Auto-step will begin.
e. To exit auto-step press the "CE" key or enter a value.
4. Manual Stepping
The PTC 400 can be manually stepped through all or some of the stored setpoints.
The procedure is as follows:
a. Press "Shift" followed by "Man"
b. Using the arrow keys, toggle up and down through the stored setpoints.
c. To exit press "CE" or simply enter a new output value.
PRECISION TEMP CALIBRATOR
11