11. Declaration of EG-Conformity 12. EG-Type approval 1. Application The Ex-Pt 720 is a precise, robust and simple to operate tempera- ture measuring device for temperature measurements in explo- sion-endangered areas (excluding firedamp-endangered under- ground mining) of Zones 2 and 1 according to IEC/CENELEC.
- a stainless-steel sensor Type 0628 2232 is used. - the Ex-Pt 720 itself may not be taken into Zone 0. - It must be absolutely ensured that the unit does not find its way a˝accidentally into Zone 0. In order to guarantee this, the carrying ststrap of the unit must be attached additionally to the belt of the u˝user or to a loop attached to his belt.
Pressing the >Hold-pushbutton< switches between °C and °F. Should no pushbutton be pressed for 5 seconds after a changeo- ver, then the new measuring value will be accepted. 7.2.5 Switching-off Switch the unit of with the >I/O pushbutton< . The display is no longer active.
We recommend that the function and accuracy of the unit be checked every two years by the manufacturer. 10. Guarantee & liability For this product, ecom Instruments GmbH guarantees the function class A and material for a period of two years under normal operating and 2, 1, 0 maintenance conditions.
Page 7
Equipment and protective systems for use according to certain regulations in explosion-endangered areas – Guideline 94/9/EC EG Type approval test certificate number TÜV 01 ATEX 1757 X Equipment: Explosion-protected temperature measuring unit Type Ex-Pt 720* Manufacturer: ecom instruments GmbH Address: D-97959 Assamstadt, Industriestrasse 2 The type of design as well as the various permissible versions are specified in the appen dix to this type approval test certificate.
Page 8
In addition, the following applies to the measurement of temperatures within category 1: The temperature measuring unit Type Ex-Pt 720* itself may not be taken into areas which require category 1 operating equipment. Only the sensors listed in the operating instruc tions as being suitable for category 1 may be used.