Advertisement
Warning!
It is advisable to have an Öhlins dealer install
the front fork.
When installing, consult your Vehicle Service
Manual.
1.1
Put the motorcycle on a workstand so that the
front wheel barely touches the ground.
Warning!
Make sure the vehicle is securely supported so
that it will not tip.
1.2
Remove the front fender, the brake calipers
and the front wheel.
1.3
Release the spring preload.
1.4
Loosen the upper triple clamp by loosening
the screws.
1.5
Loosen (do not remove) the top cap ½ turn.
1.6
Loosen the lower triple clamp by loosening the
screws.
1.7
Remove the front fork legs from the fork triple
clamps.
1 - Remove Original Front Fork
3
4
Screw
5
1/2 turn
2
2
1
Advertisement
