Document Name:
LX Era 57/80 user's manual
PART TWO – INSTALLATION
2.1 Mechanical installation
LX Era fits in a standard 80 or 57 mm instrument hole so no extra cut out is required. To fit LX Era into the
instrument panel, unscrew the two mounting screws (black) with a screwdriver and remove the two rotary
knobs.
To remove the rotary knobs do not use force. First, remove the press-in cover to access the screw. Loosen
the screw and pull off the knob. Place the LX Era in the hole in the instrument panel and first screw in the
two black screws and then install the two rotary knobs. Do not forget to tighten the screw of each fixing
knob and put the press-in covers back on.
2.2 Pneumatic connections
Three pressure connectors are fitted to the back of LX Era. A label shows their functions.
Ptot = Pitot or Total pressure
TE = TE probe
Pst = Static
Electronic TE compensation schematics (Set TE 100%)
TE tube installation schematics (Set TE 0%)
Version: 0.9H
Page 8 of 52
TE... Static
Pst... Static
Ptot... Pitot or Total pressure
TE... TE probe
Pst... Static
Ptot... Pitot or Total pressure