LX Navigation Era 57 User Manual page 17

Document Name:
LX Era 57/80 user's manual
Use of rotary switches
To move around and access all functions of the unit, two rotary knobs with push buttons are used.
The upper push/rotary knob serves the function of Cancel and from now on will be referred to as ''Cancel''.
Pressing the upper push/rotary knob will exit from a menu and cancel the settings. Turning the rotary knob
in most pages will change the volume.
In situations when you are choosing a value (e.g. QNH and altitude in the initial setup) it will change the
value by 10-fold.
The lower push/rotary knob serves the function of Enter and from now on will be referred to as ''Enter''.
Pressing the lower push/rotary knob will enter a menu, or enter a value, or open a hidden menu.
Turning the rotary knob will swipe through pages, menus, or change values by 1, depending on the situation.
To change the value of a parameter, enter must be pressed to activate the rotary keyboard (appears on the
left).
Use the lower rotary knob to input the desired value and confirm it by pressing enter.
To exit edit mode, fill out all of the fields (when a number is in question) or simply choose the enter sign (↵).
For quick change (multiplication by 10 steps) press enter button and while holding it pressed, rotate the
rotary switch.
The upper push knob is used for zooming in on all navigation pages. When choosing a value, it will behave
the same as the upper push/rotary knob – it will increase the value by 10-fold.
The lower push knob is used for zooming out on all navigation pages. When choosing a value, it will behave
the same as the upper push/rotary knob – it will decrease the value by 10-fold.
A red cross across a page is a standard aviation notification, which indicates
that this page is either not available or not working for some reason. On
navigational pages, it is usually due to bad GPS connection and on AHRS page,
it is indicating that you do not have an AHRS unit connected to your Era.
Connecting the missing module or antenna, or allowing the antenna to get a
GPS connection will eliminate this symbol. Pages that are not used can be
hided, as explained in section 4.11.12.
Version: 0.9H
Page 16 of 52