Update Procedure; Technical Specifications - LX Navigation Era 57 User Manual

Document Name:
LX Era 57/80 user's manual

2.6 Update procedure

In order to update the device, please follow the steps below:
- Find and download the update file on
Send your device's serial number to
-
to you
- Save the downloaded update file to the supplied microSD card
Insert the microSD card into the Era
-
Turn the device on
-
- Go to Setup > Transfer > Updates and select the downloaded update file
Type in the provided password
-
- Copying of the file, and with it the update process, will commence automatically
The device will turn off and require another turn on (if it is a standalone version). Zeus versions turn
-
themselves on automatically)
- ˝LX updating˝ screen will appear
After the updating process has ended the unit will start itself normally. The user should check if the
-
correct version is displayed on the greeting screen.
Note!
First update releases (up to version 1.0) do not require an update code, hence all code related steps can be
ignored. When prompted for the update password, simple type in 00000.

2.7 Technical specifications

The picture below represents the Era with all of its main components. A large 3.5-inch (for the Era 80) or 2.5-
inch (for the Era 57) transflective LCD display shows all flight-relevant information to the pilot. The Era boasts
a digital needle, which clearly shows current lift, SpeedToFly or other flight parameter.
Two push/rotary knobs and two push buttons are used for all pilot to Era communication.
Dimensions
Mass
Input Voltage Range
Average Current
Wi-Fi / Bluetooth range
www.lxnavigation.com
update-service@lxnavigation.si
82 mm x 82 mm x 63 mm
290 grams
9.0 – 18.0V DC
150 milliamps @ 12V DC
100 metres / 20 metres
Version: 0.9H
Page 14 of 52
and an update code will be sent