Cisco RV220W User Manual page 32

Wireless Net- Select the desired mode:
work Mode
•
•
Select the appropriate channel to be used between your Wireless
Wireless
Channel Router and your client devices. The default is channel 6. You can also
select Auto so that your Wireless Router will select the channel with
the lowest amount of wireless interference while the system is booting
up. Auto channel selection will start when you click the Save Settings
button, and it will take several seconds to scan through all the channels
to find the best channel.
Select Enabled or Disabled. The default is Disabled
Multiple BSSID
SSID Name The SSID is the unique name shared between all devices in a wireless
network. It is case-sensitive, must not exceed 32 alphanumeric charac-
ters, and may be any keyboard character. Make sure this setting is the
same for all devices in your wireless network. The default SSID name
is linksys-n.
This option allows the SSID to be broadcast on your network. You
SSID Broadcast
may want to enable this function while configuring your network, but
make sure that you disable it when you are finished. With this enabled,
someone could easily obtain the SSID information with site survey
software or Windows XP and gain unauthorized access to your net-
work. Click Enabled to broadcast the SSID to all wireless devices in
range. Click Disabled to increase network security and prevent the
SSID from being seen on networked PCs. The default is Enabled in
order to help users configure their network before use.
2.4GHz Wireless
•
B-Only - All the wireless client devices can be connected to
the Wireless Router at Wireless-B data rates with a maximum
speed of 11Mbps.
•
G-Only - Both Wireless-N and Wireless-G client devices can
be connected at Wireless-G data rates with a maximum speed
of 54Mbps. Wireless-B clients cannot be connected in this
mode.
•
N-Only - Only Wireless-N client devices can be connected at
Wireless-N data rates with a maximum speed of 300Mbps.
•
B/G/N-Mixed - All the wireless client devices can be con-
nected at their respective data rates in this mixed mode.
5GHz Wireless
•
A-Only - All the wireless client devices can be connected to
the Wireless Router at Wireless-A data rates with a maximum
speed of 11Mbps.
•
N-Only - Only Wireless-N client devices can be connected at
Wireless-N data rates with a maximum speed of 300Mbps.
•
A/N-Mixed - All the wireless client devices can be connected
at their respective data rates in this mixed mode.
30