Vpn - Vpn Passthrough - Cisco RV220W User Manual

VPN - VPN Passthrough

VPN Passthrough
IPSec Internet Protocol Security (IPSec) is a suite of protocols used to
PassThrough implement secure exchange of packets at the IP layer. IPSec
Passthrough is enabled by default to allow IPSec tunnels to pass
through the Router. To disable IPSec Passthrough, select Disabled.
Point-to-Point Tunneling Protocol (PPTP) allows the Point-to-Point
PPTP
Protocol (PPP) to be tunneled through an IP network. PPTP
PassThrough
Passthrough is enabled by default. To disable it, select Disabled.
L2TP Layer 2 Tunneling Protocol is the method used to enable Point-to-
PassThrough Point sessions via the Internet on the Layer 2 level. L2TP Passthrough
is enabled by default. To disable L2TP Passthrough, select Disabled.
Figure 42: VPN Passthrough Screen
73