Symbols In This Manual; Environmental Protection; Symbols On The Product - Ryobi R18MT Original Instructions Manual

cloths to remove dirt, carbon dust, etc.
Do not, at any time, let brake fluids, gasoline, petroleum-
based products, and penetrating oils, come in contact
with plastic parts. They contain chemicals that can
damage, weaken, or destroy plastic.
The dust from plaster and wall board is abrasive and
may cause premature failure of the product if it is allowed
to enter the motor area. Always use the dust extraction
accessory connected to a vacuum. Thoroughly clean the
product after use by using a brush and a vacuum. Take
care not to push dirt into the ventilation openings. Beware
of using compressed air to clean the product because dust
and grit can cause serious eye injury.
LUBRICATION
All of the bearings in the product are lubricated with a
sufficient amount of high grade lubricant for the life span of
the product under normal operating conditions. Therefore,
no further lubrication is required.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing
of as waste. The machine, accessories and
packaging should be sorted for environment-
friendly recycling.

SYMBOLS ON THE PRODUCT

Safety alert
Regulatory Compliance Mark (RCM). Product
meets applicable regulatory requirements.
No-load speed
V Volts
Direct current
Please read the instructions carefully before
starting the machine.
Wood – Plunge and flush cuts
Non-ferrous metal – Plunge and flush cuts
Plastics – Plunge and flush cuts
Wear eye, hearing and respiratory protection.
4
WARNING
To reduce the risk of injury or damage, avoid
contact with any hot surface.
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
local authority or retailer for recycling advice.

SYMBOLS IN THIS MANUAL

Note
Parts or accessories sold separately
Unlock
Lock
Speed, minimum
Speed, maximum
The following signal words and meanings are intended to
explain the levels of risk associated with this product:
DANGER
Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not
avoided, may result in minor or moderate injury.
CAUTION
(Without Safety Alert Symbol) Indicates a situation that
may result in property damage.