Oregon Harvester Handbook page 46

Saw Chain Repair
3 . Cutter and tie-strap replacement parts should be filed back to
match the existing chassis parts as shown below .
OREGON
OREGON
4 . Place the preset tie-strap on a flat outer surface of a breaker
anvil with the rivets pointing up .
5 . Assemble the saw chain to the preset tie-strap .
6 . Assemble the tie-strap with brand mark or dot face up and the
notch toward the drive link tangs .
41
18HX 18HX
18HX 18HX
Mechanical Timber Harvesting Handbook
OREGON OREGON
18HX
OREGON OREGON
18HX
OREGON
18HX
OREGON
18HX