Bluetooth® Operation; Maintenance - JVC TH-D227B Instruction Manual

Bluetooth® Operation
Pairing the unit with a Bluetooth
First time pairing
1. During On mode, press SOURCE on the unit or remote control repeatedly to select
Bluetooth® mode. The blue indicator will flash slowly.
2. Activate your Bluetooth® device and select the search mode. "TH-D227B" will appear on
your Bluetooth® device list.
• If you cannot find the soundbar, press and hold the
remote control. The system has entered pairing mode. The BT indicator will flash
rapidly and prompt "Pairing".
3. Select "TH-D227B" enter "0000" for the password if necessary. The unit will voice
"Paired" and the BT indicator will light up solidly.
4. To disconnect the Bluetooth® function, you can:
• Switch to another function on the unit;
• Disable the function from your Bluetooth® device. The Bluetooth® device will be
disconnected from the soundbar after the "Disconnected" voice prompt.
• Press and hold
device will be disconnected from the soundbar after the "Pairing" voice prompt.
If your Bluetooth
• To pause / resume playback, press
• To skip to a track, press
• The operational range between the unit and the device is approximately 8 metres.
• Before connecting a Bluetooth® device to the unit, ensure you know the device's capabilities.
• Compatibility with all Bluetooth® devices is not guaranteed.
• Any obstacle between the device and the unit can reduce operational range.
• Keep this player away from other electronic devices that may cause interference.
• The player will also be disconnected when your device is moved beyond the operational range.

Maintenance

Ensure the unit is fully unplugged from the mains socket before cleaning.
• To clean the units, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
• Do not spray aerosol at or near the unit.
18
®
device to listen to music:
/PAIR on the unit or
®
device supports AVRCP, use the supplied remote control to control play.
/
.
/PAIR button on the unit or
on the remote control. The Bluetooth®
on the unit, or /PAIR on remote control.