Sony HT-CT180 Operating Instructions Manual page 15

F:\HT-CZ1-11_UC\4559026111\4559026111HTCT180UC\01GB-
HTCT180UC\070ADD.fm
070ADD.fm Page 15 Thursday, September 18, 2014 5:05 PM
 To play multi channel audio, check
the digital audio output setting on
the device connected to the system.
For details, refer to the operating
instructions supplied with the
connected device.
BLUETOOTH device
BLUETOOTH connection cannot be
completed.
 Make sure that the BLUETOOTH
indicator (blue) is lit (page 18).
System status
During BLUETOOTH
pairing
The system is attempting
to connect with a
BLUETOOTH device
The system has
established connection
with a BLUETOOTH
device
The system is in
BLUETOOTH standby
mode (when the system
is off)
 Make sure the BLUETOOTH device
to be connected is turned on and
the BLUETOOTH function is
enabled.
 Bring this system and the
BLUETOOTH device closer together.
 Pair this system and the
BLUETOOTH device again. You may
need to cancel the pairing with this
system using your BLUETOOTH
device first.
 If the BLUETOOTH function is turned
off, turn it on (page 10).
Pairing cannot be achieved.
 Bring this system and the
BLUETOOTH device closer together.
 Make sure this system is not
receiving interference from a
wireless LAN equipment, other
2.4 GHz wireless devices, or a
microwave oven. If a device that
generates electromagnetic
radiation is nearby, move the device
away from this system.
No sound is output from the connected
BLUETOOTH device.
 Make sure that the BLUETOOTH
indicator (blue) is lit (page 18).
 Bring this system and the
BLUETOOTH device closer together.
BLUETOOTH
 If a device that generates
indicator
electromagnetic radiation, such as a
(blue)
wireless LAN equipment, other
Flashes quickly
BLUETOOTH devices, or a
microwave oven is nearby, move
Flashes
the device away from this system.
 Remove any obstacle between this
system and the BLUETOOTH device
Lit
or move this system away from the
obstacle.
 Reposition the connected
BLUETOOTH device.
Unlit
 Try changing the wireless frequency
of the Wi-Fi router, computer, etc.
to 5 GHz band.
 Increase the volume on the
connected BLUETOOTH device.
The sound is not in sync with the
image.
 When you are watching movies, you
may hear the sound with a slight
delay from the image.
Wireless sound
No sound is heard from the subwoofer.
 Check that the AC power cord
(mains lead) of the subwoofer is
connected properly. (Refer to the
supplied Startup Guide.)
masterpage:
Right
SGの参照先
15
GB
HT-CT180
4-559-026-11(1)