Toshiba WT110 User Manual page 62

3. Press the Power button on the front side of the dock and a notice of
docking will appear on the Windows Taskbar of your device.
■
The Power indicator blinks orange while starting the dock. Then you
must wait for several minutes until the Power indicator blinks white.
■
You can use the USB ports and HDMI port after the power supplied.
To disconnect your device by using following steps:
1. Press the Undock button on the front side of the dock to undock your
device.
■
Make sure the HDD indicators is off. If you press the Undock button
while a disk is being accessed, you may lose data or damage the disk.
■
Never remove your device from the dock without pressing the Undock
button. Doing so could cause loss of data.
2. Wait for a notice of undocking appears on the Windows Taskbar and
remove your device from the dock.
Docking the TOSHIBA Tablet NAS Dock via WLAN
You are able to dock the TOSHIBA Tablet NAS Dock via a wireless local
area network (WLAN).
1. Turn on the TOSHIBA Tablet.
2. Connect your device to a wireless local area network.
User's Manual
(Sample Illustration) Connect your device with the dock
Hardware & Options Operation
62