Table of Contents
Advertisement
(Sample Illustration) Connecting the power cord to the AC adaptor (3-pin plug)
Either a 2-pin or 3-pin adaptor/cord will be included with the computer
depending on the model.
2. Connect the AC adaptor's DC output plug to the DC IN 19V jack on the
back of the dock.
3. Plug the power cord into a live wall outlet.
The AC adaptor is only equipped with TOSHIBA Tablet NAS Dock.
Connecting the TOSHIBA Tablet NAS Dock
■
You must connect the AC adaptor before you connect to the dock.
■
When the dock is connected to your device, you can not use the follow-
ing ports on your device: DC IN 19V jack and HDMI out port.
1. Turn on the TOSHIBA Tablet.
2. Align the docking interface on the left side of your device with the
docking connector on the dock.
User's Manual
Hardware & Options Operation
61
Advertisement
Table of Contents
