Table of Contents
Advertisement
Preparation
Connect the cable to the LineCrypt according to the connection scheme.
Modem
Internet
Plug the connection to your internal network into the 10BaseT internal socket.
The connection to InternetGateway is made via the 10BaseT
external socket. As the pin assignment of the Ethernet socket corresponds to
the pin assignment of a network card, the following applies for the cable to be
used:
Use a crossed cable when connecting to a network card (e.g. PC).
•
Use an uncrossed cable when connecting to a hub or an Ethernet switch.
•
If you wish to manage the LineCrypt DSL locally, plug the PC cable into the
mini DIN 8 socket "[ ... ]" for the local management.
10BaseT
external
Fig. 2: Connection scheme, LineCrypt DSL
Contact
1,2
3
4,5
6,7,8
Table 1: Allocation of the RJ-45 plug
110 ... 230 V
local management
V.24
Hub
10BaseT
internal
Line
Transmission lines (LineCrypt
transmits)
Not used
Reception lines (LineCrypt receives)
Not used
Assembly
PC
7
Advertisement
Table of Contents
