Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for T-TeleSec LineCrypt DSL
- Page 1 T-TeleSec LineCrypt DSL User's Guide...
-
Page 2: Table Of Contents
1.Contents General..........................3 Overview of pictorial symbols..................3 Safety notes........................3 Power failure......................4 Function Overview......................5 Assembly.........................6 Included in delivery....................6 Preparation.........................7 Installation place.....................11 Start-Up .........................12 CD/configuration software..................12 Operation........................13 LED on the top side....................13 LED on the rear side ....................14 Technical Data......................15 Glossary.........................16... - Page 3 Registered trademarks, trademarks, and service names are used in this manual. Even if they are not marked as such, the relevant protection regulations apply. IDEA is a trademark of Ascom Systec AG...
-
Page 4: General
Safety symbol to warn against danger for people and property is identified with a triangular warning sign. Important messages for data security are identified with the hand icon. Important messages for operation of the LineCrypt DSL are identified with the bulb icon. Safety notes Do not open the LineCrypt. -
Page 5: Power Failure
Power failure The configuration remains unchanged in case of a power failure. The LineCrypt DSL is not provided with an emergency operation. In the event of a power failure you cannot communicate via the LineCrypt DSL. -
Page 6: Function Overview
LineCrypt in an unprotected network allow a protected Virtual Pri- vate Network (VPN) to be set up. The LineCrypt DSL can set up IP tunnels to LineCrypt DSL, L and SOHO. If the IP addresses are assigned dynamically for the connection configuration, two Li- neCrypt DSL require a directory service, which can be provided, for example, by a LineCrypt L. -
Page 7: Assembly
The LineCrypt DSL complies with the legal requirements for telecommunica- tion equipment. End users may carry out the assembly and installation them- selves. You can connect the LineCrypt DSL to the DSL modem and connect it with your internal network or your PC. -
Page 8: Preparation
Reception lines (LineCrypt receives) 6,7,8 Not used Table 1: Allocation of the RJ-45 plug If you wish to manage the LineCrypt DSL locally, plug the PC cable into the mini DIN 8 socket ”[ ... ]” for the local management. - Page 9 Assembly 10BaseT 10BaseT [...] external internal Fig. 3: Overview of sockets If the authorizations based on the certificate number, your communications partner requires this number. You can find the certificate number directly on the Chip card (“enc.” at end of number) or you can read it with the help of a PC and the configuration software from the LineCrypt.
- Page 10 Assembly Fig. 5: Unscrewing the cover Now remove the cover horizontally until the limit stop (approx. 9 mm) and then lift it up. To remove the Chip card, pull the card lock out. Fig. 6: Removing the cover Now remove the Chip card and note the Certificate ID. Plug the Chip card back into the card slot.
- Page 11 Card lock Chip card Fig. 7: Chip card installation If the Chip card should remain permanently in the LineCrypt DSL, put the card lock back into its operational position. Assemble the cover to the device and fix it with the screw.
-
Page 12: Installation Place
Assembly Installation place Place or hang the LineCrypt DSL in a suitable place. For wall mounting, please use the enclosed drilling template and mount the LineCrypt with the sockets on the underside. The installation place should be dry and free from dust. The Li- neCrypt is designed for an environmental temperature range of +41°F to... -
Page 13: Start-Up
Start-Up After the appropriate installation, connect the LineCrypt DSL with the mains ca- ble plug to a earthed socket. The LineCrypt DSL perform a self-test. After 10 to 15 seconds it will start up normal operation. It is not possible to set up connections with other equipment in the delivery status. -
Page 14: Operation
Operation Operation LED on the top side On the top side of the LineCrypt there are three multi-colored light-emitting di- odes (LED), which are labeled, On, I and II. The On LED signals the ready status of the equipment. The I LED serves to dis- play the data traffic on the network. -
Page 15: Led On The Rear Side
Operation LED on the rear side On the rear side there are four LED. Two of the LED (green and yellow) provide information about the status of the peer Ethernet interface and have the follow- ing meaning: Yellow: The Ethernet connection is intact. •... -
Page 16: Technical Data
Ethernet interfaces 2 x 10BaseT (10 Mbps, half duplex / full duplex) with Western RJ45-WE8/8 sockets PC interface V.24, Mini DIN 8 Chip card T-TeleSec NetKey Card (with TCOS 2.x) Payload data encryption IDEA, DES or Triple-DES Authentication Table 2: Technical data... -
Page 17: Glossary
Glossary Glossary Certificate Authenticated allocation of a public key for an identity expressed by the digital signature of a Trust Center (of Deutsche Telekom AG). Each T- TeleSec NetKey Card has an individual certificate Certificate ID Number in a certificate that provides the certificate with unambiguous identification. - Page 18 Glossary (also called datagrams) are transported by the IP as independent data packets (even in the case of identical senders and receivers). IP guarantees neither observance of a particular sequence nor delivery to the receiver (that is, datagrams can be lost on account of network overload, for example).
- Page 19 Glossary TCP/IP (Internet Protocol and Transmission Control Protocol) TCP is a connection-oriented transport protocol for use in packet switched networks. The protocol builds on the IP protocol, supports the functions of the transport layer, and establishes a secure connection be- tween the entities before data transfer.
- Page 20 Index Authentication 15 Certificate ID 9, 16 Chip card 6, 8ff, 13, 15, 18 Connection scheme 6, 16 drilling template 11 Environmental temperature 15 Ethernet 6f, 12, 14ff IDEA 15 IP Network IP Tunnel 5, 17 LAN 17 LED 13, 17 NetKey Card 13, 15, 17 Operating System...
- Page 21 Please enter the telephone number when handing over the unit. The LineCrypt fulfils the requirements of the following EU Directive: 1999/5/EG For this reason the LineCrypt bears the CE mark. Responsible for content: T-TeleSec Products Further information : Internet http://www.telekom.de/t-telesec e-mail T-Telesec@telekom.de...