Operation; Led On The Top Side - T-TeleSec LineCrypt DSL User Manual

Operation

LED on the top side

On the top side of the LineCrypt there are three multi-colored light-emitting di-
odes (LED), which are labeled, On, I and II.
The On LED signals the ready status of the equipment. The I LED serves to dis-
play the data traffic on the network. The II LED serves to display key exchanges
and faults in the equipment management.
LED On
Green light
Orange light
Orange blinking
1x
2x
3x
4x
5x
8x
9x
LED I
Red blinking
Green blinking
LED II
Orange light
Green light
Red light
Orange blinking
Red blinking
No Chip card plugged in
Valid Chip card plugged in
Authorization file/configuration missing
Problem with the Chip card.
Recovery: Plug Chip card in properly, or
change Chip card (TeleSec NetKey Card 2.x)
Internal error detected during self-test
Encrypted data traffic
Unencrypted data traffic
Key exchange in progress
Key exchange successful
Key exchange failed
Configuration fault
Configuration fault
Operation
13