Parts Description Parts Description Power On/Off button Status indicator LED Earpiece Loud speaker Wi-Fi button Charger jack Antenna Microphone for hands-free calling SIM card holder Micro USB jack Adaptor lock Earphone jack Microphone...
Getting Started The Thuraya unit uses satellite communications which Installing the Application requires direct line of sight to a Thuraya satellite. To In order to use the satellite unit with your smartphone, achieve the best connection, please note the following: you need to download the Thuraya SatSleeve Hotspot •...
Page 4
Inserting the Battery Turning On the satellite unit Remove the battery cover by pushing it downward Press and hold the power button down for about 2 (1) and sliding it down (2). seconds to power on the unit. The blue LEDs will blink and you will hear a beeping sound.
Missed Call Mute On to connect your phone to the satellite unit (the Network Name Ciphering Off default password is 12345678). Location Information 3 Open the SatSleeve Hotspot application. Contacts Tab Voice Mail Messages Tab Phone Tab More Options Home Tab...
Page 6
SOS Call without smartphone Setting an SOS Number 1 Select More at the The satellite unit allows you to make and receive a bottom of the screen. call even if you don’t have the smartphone with you. 2 Tap Call > SOS number. The SOS Call button is located between the main unit and the docking adaptor.
Sending a Message Managing Contacts 1 Tap the Messages tab. When using the Thuraya SatSleeve Hotspot application, you have access to all of your contacts 2 Enter a phone number or select the phone on your smartphone. If you create a new contact in number from your contacts.
Page 8
You can use emails, instant messaging, social media and smartphone apps over satellite on your smartphone by switching on Satellite Data on the SatSleeve Hotspot App. 1 Tap More. 2 Tap Satellite Data 3 Tap On to activate satellite data 4 If the MAC address field is empty, go to the field and tap My MAC address.
User Guide | ENGLISH Settings Charging the Battery Connect the charger to the bottom left side of the Tools satellite unit. You can activate satellite data and change SSID, password and Wi-Fi network security method. The GPS function allows you to view your current coordinates and send them by SMS.
Page 10
1 Select Start > Settings > Control Panel > and then Next. System > Hardware > Device Manager. 4 Enter *99# on the Dial-up phone number 2 Check the USB serial port of the SatSleeve (e.g. field. You do not need to enter user name and COM40). password.
Please refer to page 2. when there is an or 3G call is received while a satellite incoming GSM or call is ongoing, the satellite call will be Is the SatSleeve Hotspot application 3G call. dropped. active? Unable to hear...
FOR EXPOSURE TO RADIO WAVES receive and transmit the satellite signal therefore in this mode Your wireless SatSleeve phone is a radio transmitter and of operation is not practical) the use of bodyworn accessories receiver. It is designed and manufactured not to exceed the...
Warranty Period, the Product will be repaired or replaced, ● fire, flood or other nature caused accidents at Thuraya’ sole and exclusive option, and at no charge to ● spills of food or liquids; moisture Buyer. Buyer will be required to provide reasonable proof of ●...
“THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER Thuraya regarding the Product or this Limited Warranty. In WARRANTIES, WHETHER EXPRESSED, IMPLIED OR no event shall Thuraya liability exceed the cost of correcting STATUTORY, INCLUDING, WITHOUT LIMITATION, THE defects as provided herein.
Page 15
Company reserves the right to make changes and improvements to any of the products described in this manual without prior notice. No reproduction in whole or in part allowed without Thuraya’s prior written approval. If any part of this Limited Warranty is held to be illegal or...
Need help?
Do you have a question about the SatSleeve and is the answer not in the manual?
Questions and answers