Connecting; Organizing Cables; Connecting The Ac Adapter; Charging The Unit (Secondary Unit Only) - LG SJ7 Owner's Manual

Wireless sound bar
Hide thumbs Also See for SJ7:
Table of Contents

Advertisement

12

Connecting

Organizing cables

You can organize the cable with cable ties.
1. Hold the cables together with cable ties as shown
below.
2. Tighten cable ties.
2
Connecting the AC
Adapter
Connect the speaker to the power supply with the
supplied AC adapter.
1. Connect the supplied AC power cord to the AC
adapter.
2. Connect the AC adapter cable to DC IN adapter
input.
3. Plug the AC power cord into an AC outlet.
>
Caution
Only use the AC adapter supplied with this
device. Do not use a power supply from another
device or manufacturer. Using any other power
cable or power supply may cause damage to the
device and void your warranty.
Charging the Unit
(Secondary unit only)

Connecting the AC adapter

Secondary unit uses built-in battery. Before using it,
charge the battery by connecting the AC Adapter.
1. Connect the supplied AC power cord to the AC
adapter.
2. Connect the AC adapter cable to DC IN adapter
input.
3. Plug the AC power cord into an AC outlet.
If the battery is fully charged in charging mode,
LED is changed from red to green. Then LED is
turned off after 15 seconds.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spj8b-wSj7-c

Table of Contents