Table of Contents
Advertisement
8
Operating
Connecting the
AC Adapter
This speaker uses built-in battery. Before using it,
charge the battery by connecting the AC Adapter.
1. Connect the supplied USB cable to the AC
adapter.
2. Connect the USB cable to USB port of the
2
speaker.
3. Plug the AC adapter into an AC outlet.
If the battery is fully charged in charging mode,
Battery LED is changed from red to green. After
15 seconds, Battery LED turns off.
>
Caution
AC adapter is not supplied.
It is recommended that you use the 5 V AC
adapter approved by LG Electronics Inc. (more
than 1.8 A) with this unit because of danger of
explosion. If you do not use the recommended
adapter, charging is unavailable or charging time
may differ.
(Not supplied)
Checking the charging status
When speaker's battery is charging, you can check
the charging status by Battery LED .
LED
Green
Off
Battery is fully charged.
Green
Off
Battery is charging.
Red
Red
,
Note
y Operating time is approx. 5 hours. (Based
on fully charged the battery and continuous
playback using 50 % volume level.)
It may vary depending on the battery status
and operational conditions.
y If you listen to the music while charging, it will
take longer to charge.
y When the speaker is not charging by
overheating, Battery LED turn on red and
amber alternately. And charging is stopped.
y If the Battery LED turns off, the speaker's
battery is fully charged.
Description
Advertisement
Table of Contents
