Connecting The Aerials; Connecting To The Mains Supply - Hitachi HTD-K200E Instruction Manual

Connecting the Aerials

Connecting the FM Aerial
1. Connect the included FM aerial to the FM ANT. socket on the rear of the DVD player.
2. Slowly move the aerial to find a location where reception is good, then fasten it to a
wall or other rigid surface.
Connecting the MW (AM) Loop Aerial
1. Use the included MW (AM) loop aerial to connect to the MW Loop and GND terminals.
Press down the tab to open the terminal and insert the white wire to the MW Loop
terminal. Release the tab to lock the wire in the terminal.
2. Press down the tab to open the terminal and insert the other wire to the GND terminal.
Release the tab to lock the wire in the terminal.

Connecting to the Mains Supply

1. After all connections are properly completed, connect
the mains cable to the mains socket. The DVD player is on
standby and the red indicator illuminates.
Press the ON/STANDBY button on the DVD player or the
2.
STANDBY/ON button on the remote control to turn the
unit on. The red indicator is off and the display on the front
of the unit illuminates.
Be sure to unplug the mains plug from the mains socket when going out or when the system is not in use
for an extended period of time.
VIDEO
CONNECTING SPEAKERS OTHER THAN Y
THE SPEAKERS SUPPLIED WITH THE UNIT,
VIDEO
MAY DAMAGE THE UNIT.
OUT
SPEAKERS
SR SL SUB CEN FR FL
P
4 3 4 4 b R
SCART
AUX
P IN
r L
OPTICAL
HDMI
IN
white
GND
MW (AM) Loop
Aerial
(included)
FM Aerial
(included)
GB
19