Using The Bluetooth Audio Player - JVC EXAD KW-ACX810 Instruction Manual

Using the Bluetooth audio player

Sound mode
(☞ page 50)
Status of the device
Signal strength/Battery
remainder (only when
the information comes
from the device)
1
* Indicates the button pressed. It may be different from the operation status.
2
* This button appears when the Bluetooth Adapter is connected.
3
* You cannot select "NEW DEVICE" when a Bluetooth audio player is connected.
~
Press [SOURCE], then press [Bluetooth
AUDIO].
(☞ page 11)
• You can also use SOURCE on the monitor
panel. Press it repeatedly.
Ÿ
Start playback.
• See page 34 for connecting a new device.
• See page 35 for connecting/disconnecting a
registered device.
• See page 35 for deleting a registered device.
Bluetooth Information:
If you wish to receive more information about Bluetooth, visit the following JVC web site: <http://www.
jvc-victor.co.jp/english/car/>
Connected Device Name
2
*
3 8 7
[ / ] [ ] Starts playback/pauses
4 ¢
[ ] Reverse/forward search
5 ∞
[ ] Selects the registered device
("NEW DEVICE" appears when a new device can be registered.*
[ ] Displays <Dial Menu> screen.
You can use the following buttons on the remote
controller for the Bluetooth audio operations.
Starts playback/pauses.
Reverse/forward skip
Adjusts the volume.
40
1
*
The Bluetooth icon
lights up when the
adapter is connected.
3
)