Table of Contents
Advertisement
Chapter 2
Basic Setup
This Chapter provides information on how to install and configure the WiFi
IP Camera.
System Requirements
To use the Wireless interface on the wireless model, other Wireless devices must be
compliant with the IEEE802.11ac, IEEE802.11n, IEEE802.11a, IEEE802.11b or
IEEE802.11g specifications. All Wireless stations must use compatible settings.
Mode: Infrastructure
SSID: ANY
Wireless Security: Disabled
Domain: USA
Channel No.: Auto
Installation
1. Find the Location
Identify the location for the WiFi IP Camera.
2. Connect the LAN Cable
Connect the WiFi IP Camera to a 10/100BaseT hub or switch, using the supplied
RJ-45 USB cable and a standard LAN cable.
2
5
Advertisement
Table of Contents
