Basic Connection - Philips DVDR7250H/05 Service Manual

1 Connect
Start with the 'Basic connection'.
If you have a VCR, follow the instructions for 'Connection with VCR or similar device'.
If you have a set-top box, follow the instructions for 'Connection with set-top box'.

Basic Connection

A
Before Connecting
Unplug the antenna cable that is currently connected to
your TV.
If you have only a single off-air antenna, follow 'B1'
connection.
If you have both the off-air antenna and digital terrestrial
antenna, follow 'B2' connection.
B1
Connecting
Television ( rear)
A
Disconnect the antenna cable from your TV and
connect it to the ANTENNA
recorder.
B
Use the supplied RF coaxial cable to connect the TV
socket on this recorder to the Antenna In socket
on the TV.
C
Use the supplied Tuner interlink cable to connect
the two 'A'-sockets on this recorder.
D
Use the supplied scart cable to connect the
EXT1 TO TV-I/O scart socket on this recorder to
the SCART IN socket on your TV.
E
Plug in the power cable from the recorder to an AC
power outlet
Note See the accompanying user manual for other possible connections (e.g. S-Video, Component Video)
From an off-air
antenna or
cable box
Philips Recorder (rear)
socket on this
Directions For Use
Connecting (with digital terrestrial
B2
antenna)
Television (rear)
A
Disconnect the antenna cable from your TV and
connect it to the socket on this recorder.
B
Connect the indoor DVB-T antenna cable to the
ANTENNA socket on this recorder.
C
Use the supplied RF coaxial cable to connect the
TV socket on this recorder to the Antenna In
socket on the TV.
D
Use the supplied scart cable to connect the
EXT1 TO TV-I/O scart socket on this recorder to
the SCART IN socket on your TV.
E
Plug in the power cable from the recorder to an AC
power outlet
3139 785 3180x
From an off-
air antenna or
cable box
From digital
terrestrial
antenna
Philips Recorder (rear)
5. EN 13